Filter
Top Products
DSUII Attendant User’s Guide
August, 03 Comdial 21
2.5 Night Transferred Calls - Line
Answer From Any Station
When you, as the attendant, program the system for nighttime oper-
ation using the night transfer of ringing feature, the line answer from
any station feature is made active. With this feature, you can dial an
access code over the intercom line to allow you to answer any ringing
outside line. The line need not be ringing at the your station for this
feature to be used.
• When you hear ringing,
1. PRESS INTERCOM.
2. DIAL 80.
3. SPEAK toward telephone to answer call OR LIFT handset if privacy
is desired.
2.6 Caller ID (Automatic Number
Identification)
When installed by system programming, the Caller ID feature allows
you to view incoming call numbers before you answer them.
Incoming call numbers flash in the lower half of the LCD. If you
answer the call, the number appears in the upper half of the LCD.
If another call rings in while on a call, the second caller’s number
flashes on the LCD for five seconds. The system stores the last
caller’s number.
• To dial the number of the last incoming call while on an
active call,
1. PRESS HOLD.
2. PRESS programmed SAVED NUMBER REDIAL button. (See Fea-
ture Buttons section on page 87 for programming.)