Filter
Top Products
DSUII Attendant User’s Guide
August, 03 Comdial 45
4.4 Call Parking
You can place a call on hold in the system so that it can be answered
from any station, even though that station may not have a line
appearance for the call. You accomplish this by placing the call in one
of many park orbits, where the call remains until it is answered.
You park calls in predefined zones and then retrieve them by dialing
an intercom feature code or by pressing a preprogrammed call park
button. The system can hold up to nine calls in park zones (also
referred to as orbits) where they are retrievable by all users in the
system.
• To place a call on hold within the system where it can
be answered at any telephone in the system (parking a
call in orbit),
1. While on the call, PRESS INTERCOM AND DIAL *.
2. DIAL code for park location (orbit) (91 to 99 for orbit 1–9).
3. REMEMBER the code for later use OR MAKE IT KNOWN to those
who need to know in order to retrieve the call.
• To retrieve a call that was placed on hold in the system
(parked),
1. From any station, PRESS INTERCOM AND DIAL #.
2. DIAL code for orbit 1–9 (91 to 99).
4.4.1 HANDLING PARK RECALLS
If a call remains unanswered after the park recall time has ended, the
system returns the call to the parking station where it rings. If that
telephone includes an LCD display, a message appears on the display
that shows the line number. The system installer sets the call park
recall times.
• To answer a park recall,
—SELECT ANS. The call will then connect to your station.