Filter
Top Products
To Store A Number
Longer Than 16 Digits
For telephone banking or alternate long
distance service, you may need to program a
number that is longer than 16 digits. To do so,
you will need to divide the number between
two different memory locations. Example:
Store an alternate long distance access
number in location 1 and your personal
indentification number for that service in
location 2. Please call your Cobra Consultant
at 1-773-889-3087 for additional guidance.
To Dial A Number Stored
In Memory
1. Press TALK to get a dial tone.
2. Press MEMORY.
3. Press the keypad button (1-0) that you
assigned to the number you wish to call,
and your Cobra Intenna will dial the
number automatically.
NOTE: For numbers longer than 16
digits, stored separtely, follow steps
1, 2, and 3 above, then press MEMORY
and keypad for second number.
To Replace Or Change A
Number Stored In Memory
Simply repeat the steps under “To Store A
Number In Memory”, found on the facing
page. The new number will automatically
replace the previous number stored.
NOTE: Numbers stored in memory may be
lost when you disconnect from AC power, if
the 9V battery runs down completely or is not
installed. Follow the steps under “To Store A
Number In Memory” if you need to program
the numbers again.
Cobra
®
Memory dialing lets you store and dial 10
commonly-called telephone numbers
automatically. No more fumbling with the
phone book, guessing at numbers or
accidentally misdialing the people you call
most.
To Store A
Number In Memory
1. With the handset turned off (TALK
button off), press and release the
MEMORY button.
2. Dial the phone number you wish to
store, including area code if different
from your own, up to 16 digits long.
3. Press and release the MEMORY
button again.
4. Press any keypad button between 1
and 0, which will assign the phone
number to that memory location. You
will hear 2 double beeps, which means
that the number was properly stored. If
you hear nothing, press and release
MEMORY and repeat the steps again.
Follow these same steps for every
number you wish to store, assigning
each to a keypad number, 1 through 0.
Creating A Directory
As you are programming the memory
bank, you will want to keep track of
whose number you are assigning to
each location. When finished, you may
indicate who is assigned to each
number by filling in the directory
adhesive label included. This provides a
quick and easy reference. You may
place this directory in any convenient
location on handset or base.
Directory
1
1-773-889-3087
NEED HELP?
USING THE MEMORY
DIALING FEATURE
1
2
1
2
3
DIRECTORY
3
TALK
BUTTON
MEMORY
BUTTON
2
MEMORY
BUTTON
1
2
3
4
5
6
7
8
9
10
USING THE BUILT-IN
INTERCOM/PAGING SYSTEM
Call Dad to dinner, monitor the baby while you
do laundry or keep an ear out to make sure
that the children aren’t hurt. These options,
along with many others, are at your fingertips
with your Cobra Intenna because it doubles
as a two-way intercom/paging system
between the base and the handset—and
outside calls will still come through! If you
should misplace the handset, simply activate
the pager and follow the signal until you
locate it.
See next page for details.
1
2
TALK
BUTTON
MEMORY
BUTTON
AN8630-25
Cobra
®