Filter
Top Products
When using your telephone equipment, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and injury to persons,
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the
product.
3. Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not locate base unit near water, for example,
near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement or near a swimming pool.
5. Do not place this product on an unstable cart, stand
or table. The product may fall, causing serious
damage to the product.
6. Slots and openings in the cabinet and the bottom or
back are provided for ventilation, to protect it from
overheating; these openings must not be blocked or
covered. The openings should never be blocked by
placing the product in the bed, sofa, rug or other
similar surface. This product should never be placed
near or over a radiator or heat register. This product
should not be placed in a built-in installation unless
proper ventilation is provided.
7. This product should be operated only from the type
of power source indicated on the marking label. If
you are not sure of the type of power supply to your
home, consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do
not locate this product where the cord will be
abused by persons walking on it.
9. Do not overload outlets and extension cords as this
can result in the risk of fire or electric shock.
10. Never push objects of any kind into this product
through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in
a risk of fire or electric shock. Never spill liquid of
any kind on the product.
11. To reduce the risk of electric shock, do not
disassemble this product, but take it to qualified
servicemen when service or repair work is required.
Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect
reassembly can cause electric shock when the
appliance is subsequently used.
12. Avoid using telephone (other than a cordless type)
1-773-889-3087
NEED HELP?
IMPORTANT
SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Power Supply Specifications
This symbol signifies that only the Cobra AC
Adapter supplied with this cordless telephone
(Part No. 768-023-N-001) should be used
Input: AC 120V, 60Hz, 15W
Output: DC 12V, 500mA
!
THE LIGHTNING FLASH AND ARROW
HEAD WITHIN THE TRIANGLE IS A
WARNING SIGN ALERTING YOU OF
“DANGEROUS VOLTAGE” INSIDE THE
PRODUCT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION POINT WITHIN THE
TRIANGLE IS A WARNING SIGN ALERTING
YOU OF IMPORTANT INSTRUCTIONS
ACCOMPANYING THE PRODUCT.
SEE WARNING ON BOTTOM/BACK OF PRODUCT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE
CAUTION
during an electrical storm. There may be a remote
risk of electric shock from lightning.
13. Do not use the telephone to report a gas leak in the
vicinity of the leak.
14. Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A. When the power supply cord or plug is damaged
or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions because improper adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the product to normal
operation.
E. If the product has been dropped or the cabinet
has been damaged.
F. If the product exhibits a distinct change in
performance.
The cordless handset operates on batteries. There is also
a battery supplied for the base unit memory.
CAUTION:To reduce the risk of fire or personal injury,
read and follow these instructions:
A. Use only the following types and sizes of
batteries:
A1. For Handset Unit: Cordless Telephone (Ni-Cd
rechargeable) Battery Pack 3.6V, 270 mAh
(Cobra Model 213-013-9-001).
A2. For Base Unit: 9Volt (Alkaline non-
rechargeable) Battery.
B. Do not dispose of battery pack in a fire. The cells
may explode. Check with local codes for possible
disposal instruction.
C. Since released electrolyte is corrosive and may
cause damage to eyes or skin and may be toxic if
swallowed:
C1. Do not open or mutilate battery pack.
C2. Always replace the entire battery pack rather
than reusing one or more cells.
C3. Do not expose batteries to heat or flame.
D. Exercise care in handling the battery pack in
order not to “short” the battery contacts with
conducting materials such as rings, bracelets,
and keys. The battery or conductor may
overheat and cause burns.
E. Follow the handset battery charging instructions
outlined in this manual.
F. For Base Unit Battery:
F1. Do not attempt to recharge the 9V battery
provided with or identified for use with this
product. The battery may leak corrosive
electrolyte or explode.
F2. Do not attempt to rejuvenate the battery
provided with or identified for use with this
product by heating it. Sudden release of the
battery electrolyte may occur, causing burns
or irritation to eyes and skin.
F3. Remove the 9V battery from this product if
the product will not be used for a long
period of time (several months or more),
since the battery could leak inside the
product during this time.
F4. Discard “dead” batteries as soon as
possible, since “dead” batteries are more
likely to leak in a product.
F5. Do not store this product or the battery
provided with or identified for use with this
product in high temperature areas. Batteries
which are stored in a freezer or refrigerator
for the purpose of extending shelf life
should be protected from condensation
during storage and defrosting. Batteries
should be stabilized at room temperature
prior to use after cold strorage.
AN8630-25
Cobra
®