Filter
Top Products
Configuration
The configuration menu provides options for selecting countries, languages and RF as well as
configuring the Flash setting.
To select a Country
1. Press to access the menu options.
2. Scroll to Configuration and press .
3. Press again to select Country.
4. Select the country where the RAV is
being used from the list of available
countries.
5. Press to save the country selection
and return to the Configuration menu.
Note:This is assigned to the telco for the
specific country settings.
Warning
: The country code must be set
correctly in RAV-Ware and the RF
Controller to ensure that the unit operates
properly when connected to the telco
network and that it complies with the
country’s telco requirements. Changing
this code to a country other than the
intended country of operation might cause
the RAV to be non-compliant.
Using the RAV — Programming Phone Preferences
57
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Using the RAV — Programming Phone Preferences
56
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Adjusting the Settings
You can activate the auto-answer setting, activate auto-disconnect, select ringer melodies
and adjust your ringer in the Settings menu.
To select a Ring Melody
1. Press to access the menu options.
2. Scroll to Settings and press .
3. Press again to select Ringer Melody.
4. Select one of the three ringer melodies.
5. Press to save the selection and return
to the Settings menu.
Note
: Once you select a melody, you will
hear it played through the speakers.
To adjust the Ringer Level
1. Press to access the menu options.
2. Scroll to Settings and press .
3. Scroll to Ringer Level and press .
4. Use or to adjust the volume.
5. Press to save and return to the
Settings menu.
Note
: Ringer volume is indicated by a
horizontal bar on the LCD screen.
Ringer Melody
Ringer Level
Auto Answer
*
Figure 4.10. Ringer melody
Ringer Level
Figure 4.11. Ringer level
To activate Auto Answer
1. Press to access the menu options.
2. Scroll to Settings and press .
3. Scroll to Auto Answer and press .
4. Select After 2 Rings or After 4 Rings.
-Or-
Select Disable to deactivate the Auto
Answer function.
5. Press to save selection and return to
the Settings menu.
After 2 Rings
After 4 Rings
Disable
*
Figure 4.12.Auto answer
To activate Auto Disconnect
1. Press to access the menu options.
2. Scroll to Settings and press .
3. Scroll to Auto Disconnect and press .
4. Select Enable or Disable.
5. Press to save selection and return to
the Settings menu.
Note:When enabled,Auto Disconnect will
automatically hang up the phone once the
other end is disconnected.
Enable
Disable
*
Figure 4.13.Auto disconnect
USA/Canada
Europe
Australia/New Zealand
*
Figure 4.14. Select a country
To select a Language
1. Press to access the menu options.
2. Scroll to Configuration and press .
3. Scroll to Language and press .
4. Select a language from the list.
5. Press to save the language and
return to the Configuration menu.
English
Spanish
French
*
Figure 4.15. Select a language