Filter
Top Products
RAV-Ware — Introduction
29
RAV-Ware files
You can save current RAV-Ware files, create new files, edit existing files and import files
using the menus and toolbar icons.When connected to a RAV unit, any changes made to a
RAV-Ware file are updated immediately within the RAV unit.The file must be saved to
remain permanent within the RAV-Ware file.
To save a file
1. From the File menu, select
Save File
.
2. Browse to the desired location and enter the name of the file.
3. Click
Save
.
Tip
:You can right-click on the configuration window and select
Save
File
to save your file. You can also select
Save As
to rename and
save the file you are working on.
To create a new file
1. Click the
New File
toolbar icon.
2. Select either the RAV 600 or RAV 900 depending on your
system.This will open the Configuration Screen where you can set
user preferences for your RAV system.
3. Save the file.
To edit an existing file
1. Click the
Edit File
toolbar button.
2. Locate and select the file you want to edit.
3. Click Open.
4. Make desired changes to the file.
5. Save the file.
Note: The changes will only take effect after they have been
imported to a connected RAV system.
To import a file
1. Connect to a RAV unit.
2. From the File menu, select
Import
.
3. Choose your RAV file.
4. Click
Open
.The RAV unit will reboot and then update with all the
file changes.
Tip
:You can also right-click on the configuration window and select
Import
to import a saved RAV file.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
RAV-Ware — Introduction
28
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
RAV-Ware connections
When you connect to the RAV unit, RAV-Ware automatically finds all RAV units connected
serially or on the same subnetwork and lists them in the Connections pane.
To connect to the RAV
1. Double-click the RAV-Ware desktop icon or select RAV-Ware from the Start
menu (Start/Programs/RAV-Ware/RAV-Ware.exe).
2 Click the RAV icon you want to configure in the Connections pane.
• If you are connected serially or USB, the RAV configuration window appears.
• If you are connected through the network, you will be prompted to enter a user name
and password.The default user name is
ClearOne
and the default password is
RAV
.
(User name and password are not case sensitive)
Note:To connect to a RAV unit on a different subnetwork,use Network Find. See page 30.
Connected RAV unit
Online indicator with
RAV unit name
Configuration Screen
Figure 3.4. RAV-Ware units
Figure 3.5. Configuration window
/
/