Filter
Top Products
User Options
User Options
10
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
4. Enter the phone number.
5. Press
REDIAL/PROG
to save the number. Press CLEAR to exit.
Press & hold the “1”key to enter a hyphen or the “*”key to enter a space in the num-
ber. Use CLEAR to delete the old number before entering a new number.
To program service center number
1.
Press and hold the REDIAL/PROG key until the Program icon appears on the LCD
screen.
2. Press 6 to enter the service center menu.
3. Press
REDIAL/PROG
.
4. Enter the number you want the 0 key to dial.
5. Press
REDIAL/PROG
to save the number. Press CLEAR to exit.
Press & hold the “1”key to enter a hyphen or the “*”key to enter a space in the num-
ber. Use CLEAR to delete the old number before entering a new number.
To restore factory defaults
1.
Press and hold the REDIAL/PROG key until the Program icon appears on the LCD
screen.
2. Press and hold the 9 key.The number 8 will be displayed across the LCD
screen.
3. Press
REDIAL/PROG
to confirm selection. Press CLEAR to exit.
To program the Automatic Gain Control (AGC) and Automatic Level
Control (ALC) settings
1. Press and hold the REDIAL/PROG key until the Program icon appears on the LCD
screen.
2. Press and hold the 8 key.The current AGC
setting number will be displayed on the LCD
screen.
3. Press REDIAL/PROG.The current setting
number will flash.
4. Enter a new setting number using the table.
5. Press REDIAL/PROG to confirm selection.
Press CLEAR to exit.
11
2. Press 1 to enter the Ringer Melody menu.There are five available melodies.
3. Press
REDIAL/PROG.The current melody selection will flash.
4. Press keys
1–5 to play the corresponding melody.The selected melody will
play once.
5. Press
REDIAL/PROG to save the selection. Press CLEAR to exit programming.
To change dialing mode
1.
Press and hold the REDIAL/PROG key until the Program icon appears on the LCD
screen.
2. Press 2 to enter the Dialing Mode menu.There are two dialing modes: tone
and pulse.The current dialing mode will be displayed (T for tone, P for pulse).
3. Press
REDIAL/PROG
.The current mode will flash.
4. Press
1 to select tone or 2 to select pulse.
5. Press
REDIAL/PROG
to save the selection. Press CLEAR to exit.
To change flash duration
1.
Press and hold the REDIAL/PROG key until the Program icon appears on the LCD
screen.
2. Press 3 to enter the Flash Duration menu.The current duration will be
displayed in milliseconds.There are five duration settings: 600, 300, 150, 100
and 80.
3. Press
REDIAL/PROG
.The current duration will flash.
4. Press keys
1–5 to select a new duration setting.
5. Press
REDIAL/PROG
to save the selection. Press CLEAR to exit.
To program local phone number
1.
Press and hold
REDIAL/PROG until the Program icon appears on the LCD screen.
2. Press 4 to enter the user phone number menu.
3. Press
REDIAL/PROG
.
3. Enter the local phone number.
4. Press
REDIAL/PROG
to save the number. Press CLEAR to exit.
Press & hold the “1”key to enter a hyphen or the “*” key to enter a space in the num-
ber. Use CLEAR to delete the old number before entering a new number.
To program Conference number
1.
Press and hold
REDIAL/PROG until the Program icon appears on the LCD screen.
2. Press 5 to enter the Conference menu.
3. Press
REDIAL/PROG
.
Speaker
AGC
Microphone
ALC
Setting
2
1On On
On
Off
3OnOff
4 Off Off