Filter
Top Products
User Options
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
When more than 18 characters are entered, a scroll button will appear on the LCD
display and the numbers will scroll from right to left.
To send a Flash signal
If your telephone service includes call transfer, call waiting, or conference calling,
you can use the Flash key. Refer to your local telephone service for details.
To display your local number during a call
• Press CLEAR.The phone number will appear. After several seconds, the call
timer will return.
To adjust loudspeaker volume
• Press the VOLUME UP key while on a call to increase volume.
• Press the
VOLUME DOWN key while on a call to decrease volume.
To turn the ringer on/off
• Press and hold the star (*) key.The Ringer Off icon will illuminate when
ringer is turned off.The icon will not appear when the ringer is on.
To mute during ringing
• Press the star (*) or the MUTE key to mute the ringer for the duration of the ringing.
Programming features
To allow for individual preferences and enhance ease of use, seven features can be
programmed: Ringer melody, dialing mode, flash duration, local phone number, con-
ferencing services number, service center number, and AGC/ALC.You may also
restore factory defaults.
To change ringer melody
1.
Press and hold the REDIAL/PROG key until the Program icon appears on the LCD
screen.
9
Getting Started
8
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
To store a number in the phonebook
1. Enter the phone number you want to store while conferencing pod is in
Standby mode.
2. Press and hold the
PHONEBOOK/EDIT key until the Phonebook and Program
icons appear on the LCD screen.
3. Assign a Phonebook location (0–9) by pressing the corresponding number key.
4. Press
PHONEBOOK again to save the entry.You will hear a confirmation tone.
5. To exit Phonebook Edit mode before saving the entry, press
CLEAR.
Press & hold the “1”key to enter a hyphen or the “*”key to enter a space in the num-
ber. Use CLEAR to delete the old number before entering a new number.
To access your conferencing services provider
• Press the CONFERENCE key.This feature must be programmed before use.
See page 10.
To access your service center
• While in Standby mode, press and hold the 0 key for 2 seconds.This feature
must be programmed before use. See page 10.
Call features
In addition to the basic phone operations described in the previous section, you can
perform any of the following functions during a call: change to pulse dialing, send a
flash signal, display phone number, adjust speaker volume, or turn on/off the ringer.
To use pulse dialing
The Max Wireless uses tone dialing by default.You can temporarily change to pulse
dialing during a call.
• Press the star (*) key. A special character will appear. All numbers entered
after this character will use pulse dialing.When the call is finished, the dialing
mode will revert to tone.
Phonebook and Program icons
Figure 8.Adding Phonebook entries
Program icon
Ringer Off
Figure 9.Ringer Off icon.
When the ringer is off,LEDs & the
phone icon will flash to indicate
incoming call.
Figure 10.Programming options
User Options