Filter
Top Products
If you experience problems with this equipment, contact ClearOne Communications,1825 Research
Way,Salt Lake City, Utah 84119,or by phone at (800) 945-7730 for repair and warranty
information. If the equipment is causing harm to the telephone network, the telephone company may
request you disconnect the equipment until the problem is resolved.
No user-serviceable parts are contained in this product. If damage or malfunction occurs, contact
ClearOne Communications for instructions on its repair or return.
Connection to party line service is subject to state tariffs. Contact the state public utility commission,
public service commission or corporation commission for information.This equipment cannot be used
on telephone company provided coin service.
If your home has specially wired alarm equipment connected to the telephone line,ensure the instal-
lation of this equipment does not disable your alarm equipment. If you have questions about what
will disable alarm equipment, consult your telephone company or a qualified installer.
Electrical Safety Advisory
This equipment uses AC power which can subjected to electrical surges, typically lightning transients
which are very destructive to customer terminal equipment connected to AC power sources.The
warranty for this equipment does not cover damage caused by electrical surge or lightning transients.
To reduce the risk of this equipment becoming damaged it is suggested that the customer consider
installing a surge arrestor.
IC Compliance
IC: 1970 A-RAV
Ringer Equivalence Number (REN):0.0B(ac)
NOTICE:The term "IC" before the certification/registration number signifies that Industry of Canada
technical specifications were met.
This certification means that the equipment meets certain telecommunications network protective
operational and safety requirements.The Department does not guarantee the equipment will operate
to the user's satisfaction.
The REN is used to determine the number of devices that may be connected to the telephone line.
Excessive RENs on the telephone line may result in the devices not ringing in response to an incom-
ing call.In most, but not all areas, the sum of the RENs should not exceed five (5.0).To be certain of
the number of devices that may be connected to the line, as determined by the total RENs, contact
the telephone company to obtain the maximum RENs for the calling area.The REN for this product
is listed above.
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company.The equipment must also be installed using an
acceptable method of connection.In some cases, the companies inside wiring associated with a single
line individual service may be extended by means of a certified connector assembly (telephone exten-
sion cord).The customer should be aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility
designated by ClearOne Communications. Any repairs or alterations made by the user to this equip-
ment, or equipment malfunctions, may give the telecommunications company cause to request the
user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power
utility, telephone lines and internal metallic water pipe system, if present, are connected together.This
precaution may be particularly important in rural areas.
Appendix — Compliance
117
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
FCC Part 15/ICES-003 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules and Industry Canada ICES-003.These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual,may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his/her own
expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received including interference that may cause undesired operation.
Changes or modifications not expressly approved by ClearOne Communications could void the user's
authority to operate the equipment.
FCC Part 68 Compliance
US:FBIBR00BRAV Ringer Equivalence Number (REN):0.0B(ac)
This equipment complies with Part 68 of the FCC Rules Requirements adopted by ACTA.On the
mixer unit of this equipment contains,among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this information must be provided to your telephone company.
The REN is used to determine the number of devices that may be connected to the telephone line.
Excessive RENs on the telephone line may result in the devices not ringing in response to an
incoming call.In most, but not all areas, the sum of the RENs should not exceed five (5.0).To be cer-
tain of the number of devices that may be connected to the line, as determined by the total RENs,
contact the telephone company to obtain the maximum RENs for the calling area.The REN for this
product is part of the product identifier that has the format US:AAAEQ##TXXXX.The digits repre-
sented by ## are the REN without a decimal point (e.g. 03 is a REN of 0.3).
If this equipment causes harm to the telephone network,the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn't
practical, the telephone company will notify the customer as soon as possible.Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that
could affect the operation of the equipment.If this happens, the telephone company will provide
advance notice in order for you to make the necessary modifications to maintain uninterrupted
service.
This equipment uses an RJ-11C jack that is used to connect this equipment to the premises wiring
and telephone network.This RJ-11C jack complies with the applicable FCC Part 68 Rules and
Requirements adopted by the ACTA.A compliant telephone cord and modular plug is provided with
this product. It is designed to be connected to a compatible modular jack that is also compliant.See
installation instructions for details.
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 Rules and Requirements adopted by the ACTA.A compliant
telephone cord and modular plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions for details.
Compliance
Appendix — Compliance
116
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760