Filter
Top Products
RF (Radio Frequency) Controller
The RF controller allows you to manage all calls, program user preferences and adjust
settings for your RAV.
Key Functions
MUTE
CONFERENCE
ON/OFF
FLASH REDIAL
123
45
6
7
89
0
#
*
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
HELP
LINE
PAUSE
MENU
ENTER
DOWN
UP
PHONEBOOK
CLEAR
DOWN UP
VOLUME
Introduction— Product Overview
5
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Mixer
Front
A.
Telephone LED
.This indicator lights red when the RAV is powered, but the telco is on hook
(not in use).The indicator lights green when the telco is off hook (in use) and flashes green
during an incoming call.
B.
Microphone status LEDs
. Nine indicators (RAV 900) or six indicators (RAV 600) indicate
the activation status of the microphone elements.When a microphone element is activated,
the corresponding LED lights green.When microphones are muted, all LEDs turn red.
C.
Meter LEDs.
These LEDs represents audio from all inputs.
D.
USB port
.This port enables USB connection to a PC.
Back
A.
Telephone Set, Line
. RJ-11 connection to an analog telephone jack and an analog
telephone set.
B.
RF antenna connector
. Connect the external RF antenna to this port.
C. RS-232
. RS-232 control port for connection to a control system such as AMX or Crestron
or to a computer.
D.
Camera Control
.VISCA camera control port.This connection enables microphone activa-
tion to trigger camera presets (voice tracking).
E.
LAN
.This is a 10/100 BaseT auto-detecting Ethernet port for system control through a
data network.
F.
Mic Pod In
. Use a Cat. 5 cable with RJ-45 connectors to connect the microphone pods.
G.
Playback In/Record Out
. RCA connection to record/playback devices such as a VCR.
H.
Line In/Out
. RCA connection to a codec, amplifier or sound card.
I.
Speaker Output
. Use speaker wire to connect these push terminals to the Bose
loudspeakers.
J.
Power 12 VDC.
Power supply.
ANTENNA
CDA
B
Figure 1.2. Mixer front
Figure 1.3. Mixer back
Introduction — Product Overview
4
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Product Overview
FLASH
REDIAL
Function
Press once to dial the last number called.
Key
Press once to mute microphones during a call.
Press again to unmute.
Press to activate the phone and access the dial tone. Press
again to hang up the phone.
Press once to dial stored numbers.
When you are in the Phonebook, use this key to delete characters or to
go back to the previous screen.
Press and hold for two seconds to display the status of the RAV.
Press to use call forwarding, access call waiting, or make a three-way
conference call (if supported by your telephone service).
Press down or up to navigate through the menu and phonebook.
Press while on a call to adjust call volume and ringer.
DOWN UP
STATUS
Press once to access the controller programming menu.
Once you are in the Menu, this key serves as the Enter key.
MENU
ENTER
PHONEBOOK
CLEAR
ON/OFF
VOLUME
MUTE
Indicates battery level
LCD Icon
ANTENNA
SIGNAL
BATTERY
Function
Indicates commands are received and acknowledged by base unit
and represents the signal strength from the base unit to the controller.