Filter
Top Products
20
AUTO ON HOOK
When the Auto On Hook feature is ON, Your ClearSounds CSC50-ER will automatically
disconnect the line after 5 - 8 minutes if the phone is left off the hook. This will restore your
line to be able to receive another call even if you leave the handset off the base.
In the hook position,
1. Press the MUTE button to access the Programming Menu.
2. Using the or arrow buttons, highlight <<SET PHONE>> then press the
OK button to confirm.
3. Using the or arrow buttons, scroll to select <<AUTO ON HOOK>> and
press the OK button.
4. Using the arrow buttons, choose <<ON>> or <<OFF>>.
5. Press the OK button.
6. Press the C button twice to exit.
CSC50-ER Phone Operation
MAKING AND RECEIVING A CALL
Making A Call Using The Handset
1. To make a call, lift the handset, listen for a dial tone and adjust your Volume & Tone
Settings. (See page 23 for details on the amplification functions)
2. To dial a number you can:
a. Dial a number from the keypad
b. Press one of the Priority or Memory dial buttons (See pages 14-15 for instructions
on programming Priority/Memory Dial Buttons)
c. Dial from your Phone Book or Caller ID (See page 34 for instructions on setting up
your Phone Book.)
3. On completion of the call, carefully replace the handset in the cradle.
Receiving/Answering A Call Using The Handset
1. While the phone is ringing, simply lift the handset and speak.
2. Adjust your Volume and Tone Settings if needed (See page 23 for assistance)
3. On completion of the call, carefully replace the handset in the cradle.
USING THE SPEAKERPHONE
Your CSC50-ER Emergency Connect Telephone is also a full Speakerphone that offers
volume adjustment up to +15dB. This allows you to hear and speak hands-free.
Making A Call Using The Speakerphone
1. Press the “SPKR” (speakerphone) button for dial tone.
2. Adjust the volume to fit your needs. Move the Volume Adjustment Switch located to
the left side of the telephone beside the speaker (See diagram #20).
3. To dial a number you can: