Filter
Top Products
32 33
E
N
G
L
I
S
H
General
Model Number: XLC3.4
Frequency: 1.9GHz DECT6.0
Amplification: 50dB
Handset Unit
Product in Inches: (L x W x H): 7.25 x 2 x 1.25
Weight in Pounds: 0.5 lb.
Base
Product in Inches: (L x W x H): 5.3 x 4.5 x 3.6
Weight in Pounds: 0.44 lb.
Power Supply: AC Adapter: (Input: 100V-240V AC; Output: 7.5VDC, 500
mA; Model T07505U002)
Additional Handsets
Clarity part number: XLC3.1
The XLC3.4 will support a maximum of four (4) handsets registered to a base, and
three (3) handsets maximum used in the same call.
(Additional Handsets sold separately.)
Battery Information
Battery Type: 1.2V 600mAh Ni-MH, 60AAAHC, GPI International Ltd.
Battery Life Talk Time: 6.5 Hours
Battery Life Standby: 130 Hours
Contact Clarity customer service for information on purchasing additional
handsets or replacement battery.
Clarity contact information:
Customer Service: 800-426-3738
Address: 4289 Bonny Oaks Drive
Chattanooga, TN 37406
TECHNICAL SPECIFICATIONS
XLC3.4
PARTY RESPONSIBLE
FOR REGULATORY
COMPLIANCE:
Clarity, a Division of
Plantronics, Inc.
4289 Bonny Oaks Drive
Chattanooga, TN 37406
Phone: 800-426-3738
Part 68 of FCC Rules Information
a) This equipment complies with
Part 68 of the FCC rules and the
requirements adopted by the ACTA.
On the bottom of this equipment is
a label that contains, among other
information, a product identifier in
the format US:AAAEQ##TXXXX.
If requested, this number must be
provided to the telephone company.
b) A plug and jack used to connect this
equipment to the premise’s wiring and
telephone network must comply with
the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular
plug, RJ11C USOC, is provided with
this product. It is designed to be
connected to a compatible modular
jack that is also compliant. See
installation instructions for details.
c) The REN is used to determine
the number of devices that may
be connected to a telephone line.
Excessive RENs on a telephone line
may result in the devices not ringing
in response to an incoming call. In
most but not all areas, the sum of
RENs should not exceed five (5.0). To
be certain of the number of devices
that may be connected to a line, as
determined by the total RENs, contact
the local telephone company. For
products approved after July 23, 2001,
the REN for this product is part of
the product identifier that has the
format US:AAAEQ##TXXXX. The
digits represented by ## are the REN
without a decimal point (e.g., 03 is a
REN of 0.3).
For earlier products, the REN is
separately shown on the label.
d) If this telephone equipment causes
harm to the telephone network, the
telephone company will notify you in
advance that temporary discontinuance
of service may be required. But if
advance notice isn’t practical, the
telephone company will notify the
customer as soon as possible. Also, you
will be advised of your right to file a
complaint with the FCC if you believe
it is necessary.
e) The telephone company may make
changes in its facilities, equipment,
operations or procedures that could
affect the operation of the equipment.
If this happens the telephone company
will provide advance notice in order for
you to make necessary modifications
to maintain uninterrupted service.
f) If trouble is experienced with this
telephone equipment, for repair or
warranty information, please contact
Clarity, 800-426-3738. If the equipment
is causing harm to the telephone
network, the telephone company
may request that you disconnect
the equipment until the problem is
resolved.
g) This telephone equipment is not
intended to be repaired and it contains
no repairable parts. Opening the
REGULATORY COMPLIANCE
XLC3.4