Clarity E713CC Cordless Telephone User Manual


 
57
“SEARCHING” is displayed.
Answering machine is out of range. Reduce the range.
The call does not work.
Service not activated, or wrong operator, or wrong setting. Check your Subscription
with network or change the dial mode.
No display.
Recharge battery
My cordless handset doesn’t work at all
Make sure the power cord to the cordless handset charger base unit is securely
plugged into a working electrical outlet.
Make sure the telephone line cord is securely and rmly plugged into the answering
machine and the telephone wall jack.
Make sure the power cord to the answering machine is securely plugged into a working
electrical outlet.
Charge the battery in the cordless handset for at least 16 hours. For optimum daily
performance, return the cordless handset to the charger base when not in use.
If the battery is depleted, it may take approximately 30 minutes to charge the handset
before it shows Low Battery.
Reset the telephone base. Unplug the electrical power. Wait for approximately 15
seconds, then plug it back in. Allow up to one minute for the cordless handset and
telephone base to reset.
You may need to purchase a new battery. Use only the rechargeable battery supplied
with the unit, or contact the customer service helpline found in this User Guide to
purchase the correct replacement batteries.
I cannot get a dial tone
First try all the suggestions previously listed.
Move the cordless handset closer to the answering machine. You may have moved out
of range.
CORDLESS HANDSET
TROUBLESHOOTING