Filter
Top Products
30
ANSWERING MACHINE SYSTEM
Set the Answer Delay
You can set the number of rings before the answering machine answers and starts playing
your announcement. You can set the answering system to answer after two to six rings
or TIME SAVER.
When you ring in to access your messages remotely, if your answering machine is set
to toll saver, it will answer after 2 rings if you have new messages. It will answer after 6
rings if you do not have any new messages, so if you call in and don’t get an answer after
2 rings, you can hang up and save on call charges.
1. Press <OK/MENU> and <UP/DOWN> to select Answering sys.
2. Press <OK/MENU> and <UP/DOWN> to select Ans sys setup.
3. Press <OK/MENU> and <UP/DOWN> to select # of rings.
4. Scroll <OK/MENU> and <UP/DOWN> to select the desired answer delay from
the available options 2, 3, 4 (default), 5, 6 or Toll Saver.
5. Press <OK/MENU> to conrm; display shows Saved.
Set the Recording Time of Incoming Message
You can set the maximum length of the recording time of the incoming messages.
1. Press <OK/MENU> and <UP/DOWN> to select Answering sys.
2. Press <OK/MENU> and <UP/DOWN> to select Ans sys setup.
3. Press <OK/MENU> and <UP/DOWN> to select Recording time.
4. Press <OK/MENU> and <UP/DOWN> to select your desired recording time
from the available options 1 min, 2 min (default), 3 min.
5. Press <OK/MENU> to conrm; display shows Saved.
Set the Outgoing Message Language
The answering machine announces the outgoing message when it answers a call. There is
a pre-set OGM for each of ANS & REC mode or ANSWER ONLY mode. You are able
to select your desired OGM language to playback.
1. Press <OK/MENU> and <UP/DOWN> to select Answering sys.
2. Press <OK/MENU> and <UP/DOWN> to select Ans sys setup.
3. Press <OK/MENU> and <UP/DOWN> to select Voice language.
4. Press <OK/MENU> and <UP/DOWN> to select your desired language.
USING YOUR CORDED BASE