Clarity E713CC Cordless Telephone User Manual


 
55
USING YOUR CORDLESS HANDSET
Deregister all handsets
You can deregister handsets. You may need to deregister your handsets if:
• You have ve registered handsets and need to replace a handset.
– OR –
• You wish to change the designated handset number of your registered handsets.
• You must rst deregister ALL the handsets, and then register each handset you wish
to use again, one at a time.
1. Press and hold <PAGE/FLASH> on the telephone base for about 10 seconds -
display shows Deregistering....
2. When complete, the handset screen alternately shows:
Press PAGE on base 4 sec”.
– and –
“Then press # on handset”
To register the handset(s) to the telephone base again, follow the registration instruc-
tions in the Register a handset section.
Note: There are no visual or audible alerts to indicate the base is under registration mode.
Note: If the deregistration process is not successful, you might need to reset the system and
try again. To reset, unplug the power from the telephone base and plug it back in.You cannot
deregister the handset(s) if any system handset is in use.