Filter
Top Products
Option Function:
This is a software function that lets
the user to add a pre-programmed
area code and/or long distance
code onto a seven (7) or ten (10)
digit CID number if necessary to
dial. If a local area code (codes)
and long distance code are pro-
grammed into memory, then when
the user presses ENTER/DIAL
while reviewing a CID number,
the phone will show the codes
available to add, thus allowing the
call to be dialed from memory.
If EASY mode has been activated
during the setup process, EASY
MODE will be displayed if you
attempt to enter PhoneBook or
Caller ID Memory.
OPERATIONS OF CALLER
ID
This telephone automatically displays an
incoming caller’s name and telephone
along with the date and time of the call.
It will record up to 70 calls of up to 11
digits and store the data into memory.
The LED in the MODE button will
illuminate RED to indicate a new call
has been received.
IMPORTANT: You must subscribe
to Caller ID Service from your local
telephone company to utilize this fea-
ture.
The time and date will be displayed
when the phone is on hook and not
ringing. When the phone is first plugged
in, the time and date will not be dis-
played.The clock is set by the network
when a CID call is received or you can
set the clock manually (refer to page
12).
Operating Your Telephone
E
N
G
L
I
S
H
19