Clarity 430 Cordless Telephone User Manual


 
Trouble Shooting
Noise, Static, Interference or Other Calls
Heard while Using the Handset:
Try changing channels.
Make sure the base antenna is in an
upright position.
Make sure you are in the usable
range of the base station.
Make sure the handset battery is
fully charged.
Try relocating the base unit to
another location.
Make sure the AC Adapter is not
plugged into the wall outlet with
other appliances.
Try relocating the base unit to
another location.
Phone Will Not Hold Charge:
Make sure the charging contacts on
the handset and base are free of dust
and dirt. Clean the contacts with a
soft cloth.
Make sure CHARGE LED on the base
is lit when handset is in the cradle.
If necessary, replace the handset
battery. (See Handset Battery Charging)
Difficulty in Placing or Receiving Calls:
Move closer to the base and
try again.
If moving closer does not work, you
may have lost the security code.
Reset code by placing the handset
back on the base for 5-10 seconds.
(See Security Code Section)
Make sure you have selected the
correct dialing mode, tone or pulse.
Make sure the AC Adapter is not
plugged into a wall outlet with other
appliances. Disconnect for 5-10
seconds then reconnect. Place the
handset back on the base and
reinsert the AC Adapter.
Make sure the handset battery is
fully charged.
22
C430Eng_2.6.04 2/7/04 4:39 PM Page 22