Filter
Top Products
Feature Set-up
HANDSET
Set Up Mode
NOTE: In Set Up, if there is no input within
30 seconds, the program will default to the
last selection in that mode (e.g., Language)
and the C430 will return to Standby. If at
any time you want to exit Set Up and return
to Standby, press FLASH.
To enter Setup mode press and hold the
CALL button for three (3) seconds.
Setting Language
Default: English
1. Press and hold CALL for three
(3) seconds to enter the Set Up
mode. The Caller ID display will
read, “SET LANGUAGE.”
2. Press CALL once to enter the
Language selection mode. The
current selected language will flash.
3. Press UP (
▲
) or DOWN (▼) to scroll
through the language options. The
displayed language will change to
“FRENCH” or “SPANISH.”
4. Press CALL to select the
language desired.
5. Press UP (
▲
) or DOWN (▼) to
advance to the next menu.
Setting the Area Code
1. Press CALL to enter the Area Code
selection mode. The left most digit in
the code sequence will flash. Use the
numeric keys on the key pad to enter
the desired area code.
2. Press CALL to confirm.
3. Press UP (
▲
) or DOWN (▼) to
advance to the next menu.
Setting Auto Talk
Default: Off
With the auto talk feature ON the telephone
will automatically connect to a call when lift-
ed from the cradle. With the Auto Talk fea-
ture OFF, you must press the TALK button to
connect to an incoming call regardless of the
location of the handset.
1. Press CALL to enter the auto talk
selection mode.
2. Press the UP (
▲
) or DOWN (▼)
to change the mode.
3. Press call to confirm the selection.
4. Press the UP (
▲
) or DOWN (▼)
to go to the next menu.
Setting Caller ID On/Off
Default: ON
1. Press CALL to enter the auto talk
selection mode.
2. Press the UP (
▲
) or DOWN (▼)
to change the mode.
12
C430Eng_2.6.04 2/7/04 4:39 PM Page 12