Cisco Systems SPA508G Telephone User Manual


 
Using Advanced Phone Features
Configuring Privacy Features
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 64
3
Configuring Privacy Features
Also see Using Star Codes on Cisco IP Phones, page 76.
For Cisco SPA301 and SPA501G, you can configure these features only by
using the star codes.
Task Instructions
Blocking or allowing
caller ID by using the
Setup menu
Cisco SPA50xG models Follow these steps to make anonymous calls. Be
aware that this setting will prevent your calls from
reaching recipients who block anonymous calls.
1. Press .
2. Select Preferences.
3. Scroll to Block Caller ID, and then press .
4. Press to choose Yes (your caller ID will
be blocked) or No (your caller ID will be
available).
5. Press , and then press .
6. Press to close the menu.
Cisco SPA525G/G2 Follow these steps to make anonymous calls. Be
aware that this setting will prevent your calls from
reaching recipients who block anonymous calls.
1. Press .
2. Select User Preferences.
3. Select Call Preferences.
4. Scroll to Block Caller ID.
5. Press the right-arrow navigation button to enter a
check mark (your caller ID will be blocked) or to
clear the check mark (caller ID will be available).
6. Press .
Edit
Y/N
OK
Save
Cancel
Save