Filter
Top Products
Chapter 45 Cisco IP Phone Configuration
Configuring Directory Numbers
45-34
Cisco CallManager Administration Guide
OL-5378-01
Step 7 To reset or restart the phone and apply the new settings, click Reset Phone.
Restarting the phone reregisters the phones with Cisco CallManager without
shutting the phone down. Resetting the phone shuts down the phone and brings it
back up (performs a complete shutdown and reinitialization of the phones).
Related Topics
• Cisco IP Phone Configuration, page 45-1
• Finding a Phone, page 45-28
• Adding a Directory Number, page 45-30
• Updating a Directory Number, page 45-31
• Resetting a Phone, page 45-8
• Cisco IP Phones, Cisco CallManager System Guide
• Phone Configuration Checklist, Cisco CallManager System Guide
Directory Number Configuration Settings
Table 45-3 describes the fields that are available in the Directory Number
Configuration window.
Table 45-3 Directory Number Configuration Settings
Field Description
Directory Number
Directory Number Enter a dialable phone number. Values can include
numeric characters and route pattern wildcards and
special characters except for (.) and (@). The directory
number that you enter can appear in more than one
partition.
Shared Line next to the directory number means that the
directory number appears on more than one device in the
same partition. Refer to “Directory Numbers” in the
Cisco CallManager System Guide for more information.