Filter
Top Products
Chapter 45 Cisco IP Phone Configuration
Configuring Cisco IPPhones
45-18
Cisco CallManager Administration Guide
OL-5378-01
Network Locale From the drop-down list box, choose the locale that is
associated with the phone. The network locale contains a
definition of the tones and cadences that the phone in a
specific geographic area uses.
Cisco CallManager makes this field available only for
Cisco IP Phone 7940, 7960, and 7905 models, and
Cisco VGCPhones (phones that use the Cisco VG248
Gateway).
Note If no network locale is specified,
Cisco CallManager uses the network locale
associated with the device pool.
Note If the users require information to be displayed
(on the phone) in any language other than
English, verify that the locale installer is
installed before configuring network locale.
Refer to the Cisco IP Telephony Locale Installer
documentation.
Phone Button and Expansion Module Template Information
Phone Button
Template
Choose the appropriate phone button template. The
phone button template determines the configuration of
buttons on a phone and identifies which feature (line,
speed dial, and so on) is used for each button.
The value that you enter overrides the default value for
this type of device. See the “Device Defaults
Configuration” section on page 6-1.
Cisco CallManager does not make this field available for
H.323 clients or CTI ports.
Expansion Module 1 If your phone is connected to a Cisco IP Phone 7914
Expansion Module, choose the appropriate template.
Expansion Module 2 If your phone is connected to a second
Cisco IP Phone 7914 Expansion Module, choose the
appropriate template.
Table 45-1 Phone Configuration Settings (continued)
Field Description