Filter
Top Products
Basic Call Handling
Cisco IP Phone 7902G for Cisco CallManager 9
Basic Call Handling
This section covers basic call-handling tasks such as placing, answering, transferring, and conferencing
calls. The features you use to perform these tasks are standard and available on most phone systems.
Placing a Call
Answering a Call
Ending a Call
To end a call, hang up the handset.
If you want to... Then...
Place a call Lift the handset and dial the number.
Redial the most
recently dialed number
Lift the handset and press (Redial).
Speed dial a number Press and hold (for about 2 seconds) the number on your keypad that you
assigned as a speed dial number.
For information on setting up speed dial buttons, see the “Setting Up Speed
Dial Buttons” section on page 16.
If you want to... Then...
Answer a call Pick up the handset.
Answer a priority call When you hear the special call waiting tone, answer the higher-priority
call.
For information on priority calls, see the “Prioritizing Critical Calls”
section on page 14.
Answer a priority call
when you are already
on a call
When you hear the special call waiting tone, end an active call and
answer the higher-priority call.
For information on priority calls, see the “Prioritizing Critical Calls”
section on page 14.