Cisco Systems 303 IP Phone User Manual


 
Installing Your Phone
Verifying Phone Startup
Cisco Small Business IP Phone SPA 30X User Guide (SIP) 31
2
Figure 6 Handset Retention Tab (Reversed)
Verifying Phone Startup
After receiving power and network connectivity, the phone executes a boot-up
sequence. During this sequence, phones with screens display the Cisco logo and
then “Initializing Network.” All of the lights on the phone will flash.
After your phone is successfully connected to the network and receives a basic
configuration, the extension number appears on the display screen (on models
with a display screen) and the phone has a dial tone.
On models with screens, the phone displays the standard menu for the phone. The
date, name and number of the phone display on the top line of the LCD screen. At
the bottom of the LCD screen, softkeys are displayed over their associated soft
buttons.
On models with no screen, such as the Cisco SPA 301, you should hear a dial tone
when picking up the handset or pressing the speakerphone button.