Filter
Top Products
73
E
To perform constant calculations
} 1. Enter the Calculator Mode.
3 qq 2 2. Enter the calculation, pressing the arithmetic operator
key twice. This will causes the “K” indicator to appear on
the display to indicate a constant calculation.
• You can use this constant calculation technique for
addition, subtraction, multiplication, and division.
u 3. Press & to display the initial result (in this case, 5).
u 4. Press & again to add 3 to the result (in this case, 5 + 3
= 8).
• You can repeat the above operation as many times as
you like. Each time you press &, the previous result
obtained is added to, subtracted from, multiplied by, or
divided by the value to the left of the arithmetic operator.
• To clear a constant calculation, press
AC.
To correct errors in calculations
If you enter a wrong value, press C and then enter the correct value.
If you press the wrong arithmetic operator key (!, @, #, $), simply press the
correct key before entering anything else.
About calculation errors...
Whenever an error occurs, the indicator “E” appears on the display.
E
‰.
Using the Calculator