Canon PIXMA MP830 Answering Machine User Manual


 
Chapter 1 Introduction 19
ENGLISH
* The settings configured from MP Navigator apply when scanning from the machine's operation
panel.
If with some types of original the position and size of the image is not scanned in correctly, please
refer to "Selecting the Behavior of the Operation Panel with MP Navigator" in the Scan Guide
(On-screen Manual) and change the MP Navigator [Document Type] and [Document Size] to
match those of the original being scanned.
(16)
[Feed Switch] Selects the paper source. Press this toggle switch to change the
paper source between the Auto Sheet Feeder and Cassette.
(17)
[Photo Index Sheet] Switches to Photo Index Sheet mode.
(18)
[Enlarge/Reduce] Sets the enlargement or reduction ratio for copying.
(19)
[Search] Looks up target photos in the memory card using the shooting date
as the search key.
(20)
[Two-Sided] Specifies settings for <Two-sided copy>.
(21)
[FAX Quality] Sets the resolution of the fax you are sending.
(22)
[Back] Allows you to return to the previous screen.
(23)
[OK] Finalizes your selection for the menu or setting item.
Restores the machine to normal operation after a printing error
was resolved, or if paper jams are cleared. Ejects documents
remaining in the ADF.
(24)
[S] [T] [W] [X] Scroll through menu selections, and increase or decrease the
number of copies. You can use these buttons when <S>, <T>,
<W>, and <X> are displayed on the LCD. Also [W] cancels the
entered character, and [X] enters a space between characters when
entering characters.
(25)
[Trimming] Use to crop the photo that is displayed.
(26)
[Tone] Switches temporarily to tone dialing. Also changes the mode when
entering characters.
(27)
[Redial/Pause] Redials the last dialed number using Numeric buttons. Also enters
pauses between or after numbers when dialing or registering
numbers.
(28)
[Coded Dial] Press this button and a two-digit code to dial a pre-registered fax/
telephone number or group.
(29)
[Hook] Engages or disengages the telephone line.
(30)
[Black] Starts black & white copying, scanning, or faxing.
(31)
[Color] Starts color copying, photo printing, scanning, or faxing.