Filter
Top Products
GLOSSARY G - 3
Fax/Tel You can receive faxes and telephone calls. Do not use this
mode if you are using a telephone answering device (TAD).
Fine resolution Resolution is 203 x 196 dpi. It is used for small print
and graphs.
Gray scale The shades of gray available for copying and faxing
photographs.
Group number A combination of Speed-Dial numbers that are
stored in a Speed-Dial location for Broadcasting.
Help list A printout of the complete Menu table that you can use to
program your MFC when you do not have the User’s Guide with
you.
Journal Period The pre-programmed time period between
automatically printed Fax Journal Reports. You can print the Fax
Journal on demand without interrupting the cycle.
LCD (liquid crystal display) The display screen on the MFC that
shows interactive messages during On-Screen Programming and
shows the date and time when the MFC is idle.
Manual fax When you lift the handset of your external telephone so
you can hear the receiving fax machine answer before you press
Mono Start
or
Colour Start
to begin transmission.
Menu mode Programming mode for changing your MFC’s settings.
OCR (optical character recognition) The bundled ScanSoft
®
OmniPage
®
software application converts an image of text to text
you can edit.
Out of Paper Reception Receives faxes into the MFC’s memory
when the MFC is out of paper.
Overseas Mode Makes temporary changes to the fax tones to
accommodate noise and static on overseas phone lines.
Pause Allows you to place a 3.5 second delay in the dialling
sequence stored on Speed-Dial numbers. Press
Redial/Pause
as many times as needed for longer pauses.
PhotoCapture Center
™
Allows you to print digital photos from your
digital camera at high resolution for photo quality printing.
Photo resolution A resolution setting that uses varying shades of
gray for the best representation of photographs.