Filter
Top Products
APPENDIX A A - 6
When you are using a TAD, the LCD shows
Telephone
.
Connections
The external TAD must be connected as shown above.
1
Set your external TAD to one or two rings. (The MFC’s Ring
Delay setting does not apply.)
2
Record the outgoing message on your external TAD.
3
Set the TAD to answer calls.
4
Set the Receive Mode to
External TAD
.
(See
Choosing the Receive Mode
on page 4-1.)
Do not connect a TAD elsewhere on the same phone line.
TAD
TAD