BT 2010 Cordless Telephone User Manual


 
32
Freestyle 2010 ~ Issue 2 ~ Edition 1 ~ 25th June ’02 ~ 4795
(It is not important which one you
choose, but it is suggested that you
use the same letter as that shown
on the other handsets registered to
this base.)
Press the
button to confirm.
The display will show a flashing
cursor and ENTER PIN.
Enter your PIN (factory setting 0000).
Press the
button to confirm.
The display will show SEARCHING
and the letter of the chosen base will
flash.
When registration is complete, the
display will show the handset name
and number.
Please note
If the display shows NO BASE it means that
the handset could not find the base that you
selected. Please ensure that the base you are
registering to is within range and switched on,
and that you hold the PAGE button until it
beeps before selecting the base on the handset.
If the display shows NOT POSSIBLE it means
that there are already 5 handsets registered
to the base. You will need to de-register one of
the other handsets before you can register
another one.
Press the MENU button.
The display will show REDIAL.
Press the DOWN button until the
display shows BS SETTINGS.
Press the
button.
The display will show AUDIO.
Press the DOWN button until the
display shows DE-REGISTER.
Press the
button.
The display will show a flashing
cursor and ENTER PIN.
Enter your PIN (factory setting 0000).
Press the
button to confirm.
Use the DOWN button to select the
handset you want to de-register (1-5).
Press the
button to confirm.
The display will show DEREG?
Press the
button to confirm.
You will hear a confirmation beep.
The display will show STORED and
then DE-REGISTER.
Press the
button until the display
returns to the standby screen.
To de-register a Freestyle 2010
handset
Menu
ADDITIONAL