BT 2010 Cordless Telephone User Manual


 
26
Freestyle 2010 ~ Issue 2 ~ Edition 1 ~ 25th June ’02 ~ 4795
You can lock the handset keypad to
prevent accidental button presses.
Press the MENU button.
The display will show REDIAL.
Press the DOWN button until the
display shows KEYGUARD.
Press the
button.
The display will show ACTIVATE?
Press the
button to confirm.
You will hear a confirmation beep and
the display will show CANCEL 159.
To switch the keyguard off, enter 159
using the keypad.
The display will return to the
standby screen.
To switch the keyguard on and off
Menu
The display will show REDIAL.
Press the DOWN button until the
display shows HS SETTINGS.
Press the
button.
The display will show AUDIO.
Press the
button.
The display will show RING VOLUME.
Press the DOWN button until the
display shows HS TONES.
Press the
button. The display will
show BATTERY LOW.
Use the DOWN button to select
either BATTERY LOW, NO SIGNAL
or KEY BEEPS depending on which
beeps you want to switch off or on.
When the option you want is
displayed, press the
button to
confirm.
Use the DOWN button to select
either ON or OFF (the current
setting will have a
next to it).
Press the
button to confirm.
The display will show STORED and
then the option you have changed.
Press the
button to return to the
standby screen.
The handset will beep:
• If the battery is low.
• If you go out of range of the base
whilst on a call.
• Each time you press a button.
You can switch any of the above beeps
off and on independently.
Press the MENU button.
To switch the handset beeps off
and on
Menu
Please note
When the handset beeps are switched off, the
confirmation beeps you hear when you select
a menu option will also be switched off.
HANDSET SETTINGS