Filter
Top Products
Diverse 4010 Classic ~ Issue 2 ~ 6th Edition ~ 1st March ’02 ~ 4413
34
Base station PIN (Personal
Identification Number)
Your base station PIN has a default
setting of
0000
but you may want to
change this to prevent unauthorised
use of your handset(s).
If you change your PIN keep a record
of the new number by writing it in the
space provided on page 8.
To change the base station PIN
Press the MENU options button.
Press the DOWN button to
highlight
BASE SET
.
Press the OK button.
Press the DOWN button to
highlight
SYSTEM PIN
.
Press the OK button.
Enter current PIN (original
setting
0000
).
Press the OK button. Display
shows
NEW PIN
.
Enter your new 4 digit PIN.
Press the OK button. Display
shows
REP PIN.
Enter your new 4 digit PIN
again.
Press the OK button to
confirm. Display shows
SAVED
.
Press the RED PHONE button
to return to the idle screen.
MENU
OK
OK
OK
OK
OK
Base station settings
To adjust the base ringer volume
There are 5 levels to choose
from (1–5), a ‘crescendo’ ring
(6) that increases in volume,
or you can switch the ringer
off altogether (0).
Press the MENU options button.
Press the DOWN button to
highlight
BASE SET
.
Press the OK button.
Display shows
AUDIO SET UP
.
Press the OK button.
Display shows
RINGER VOL
.
Press the OK button. You hear
the current volume and the
level is shown on the display.
Press the DOWN button to
select the required level.
Press the OK button to confirm.
Press the RED PHONE button
until you reach the idle screen.
MENU
OK
OK
OK
OK
BASE STATION SETTINGS