Filter
Top Products
Diverse 4010 Classic ~ Issue 2 ~ 6th Edition ~ 1st March ’02 ~ 4413
11
Insert the two batteries supplied, as
indicated inside the battery
compartment and slide the battery
compartment cover shut.
Insert the batteries
SETTING UP
When the handset is registered the
display will show:
If the icons on the display
flash continuously...
It means that the handset is not
registered with the base station.
Ensure you have correctly carried out
step 3 above. If the product has still
not registered, please see “Registering
manually” on page 37.
All additional handsets you purchase
will need to be individually registered
with the base station before they will
work with the Diverse 4010 Classic.
Leave the handset for approx. 16 hours
in the base station to charge the
batteries, as they are not charged in the
factory. The battery status icon flashes
on the handset to indicate that the
batteries are being charged.
The battery cover may be found in the
packaging with the batteries.
To register your handset, place it in the
base station with the display facing
upward. After approx. one minute, the
handset's internal number is displayed
(e.g. INT 1). Successful registration is
signalled by a confirmation tone.
Helpline
If you experience any difficulties
with your Diverse 4010 Classic,
please call the BT Diverse Helpline
on 08457 908 070.
WARNING
Under no circumstances should
non-rechargeable batteries be used.
Only use the approved batteries, please
see page 40. Using unapproved
batteries will invalidate your guarantee
and may damage the telephone.