Filter
Top Products
Diverse 4010 Classic ~ Issue 2 ~ 6th Edition ~ 1st March ’02 ~ 4413
Plan the location
Situate your product close enough to
the telephone and mains power sockets
so that the cables will reach.
Make sure it is at least 1 metre away
from other electrical products to avoid
interference.
Do not situate the product in the
bathroom or other humid areas.
WARNING
Do not connect the telephone line cord
to the phone socket until your handset
is fully charged. This will prevent the
risk of the phone being answered
before the battery is charged.
Answering the phone before the battery
is fully charged may prevent it from
reaching its optimum capacity.
IMPORTANT
Please note that your handset is NOT
registered to the base station. The
Diverse 4010 handset will be easily
registered once you complete the steps
1 to 3 below.
2 Plug the power supply unit
into the wall socket
Setting up
1 Connect the base station
Plug the power supply cable into the
power socket on the underside of
your base.
SETTING UP
10
3 Registering and charging
the handset
The display is protected by a plastic
film. You can remove this protective
plastic film from the display.