Filter
Top Products
Diverse 3000 ~ Edition 7 ~ 28th February ’01 ~ 3723
26
Using Caller Display and
Call Waiting
To take the Call Waiting
BT’s Caller Display and Call Waiting
If you subscribe to Caller Display
you can see who is calling you
(on your handset display). If you
are on a call and you also
subscribe to a Call Waiting service,
the second incoming call number
will appear on the handset display
and you will hear an intermittent
beep through the handset. This is
to alert you to another caller
waiting to speak to you.
With BT’s Caller Display and Call
Waiting service your Diverse
base station receives caller
information which is transmitted
over the BT Network.
If you are using the Classic
handset, the screen shows the
caller’s number (if it has been
sent) when the phone rings.
With the Executive handset if you
have stored a name to go with the
number in your handset
directory, the name will be
displayed instead.
Press the
RECALL
button. Your first caller
is put on hold whilst
you speak to your
second caller.
To speak to your first
caller again you can
either:
Press the RECALL
button again and you
will be reconnected to
your first caller, your
second caller will be put
on hold. You can use the
RECALL button to toggle
between the two callers.
Or
Press the RED PHONE
button to end the
conversation with the
caller you are currently
speaking to. The
handset will ring again.
Press the
GREEN
PHONE button and you
will be reconnected to
the caller who was
on hold.
R
R
R
Diverse 3000 H_set & Charger 22/3/01 1:54 pm Page 26