BT 3000 Classic Cordless Telephone User Manual


 
Diverse 3000 ~ Edition 7 ~ 28th February 01 ~ 3723
25
Directory for barred/enabled
numbers
Press the OK ()
button. Display shows
the first location.
Press the
MEMORY
button if necessary to
scroll to the location you
want
1-5
.
Press the
OK ()
button.
Enter the number you
want to bar, enable or
change. Press the
button to delete digits.
Press the
OK ()
button to confirm.
Press the RED PHONE
button to return to
standby.
Once you have set the
numbers you want, you
can then switch call
barring/enabling on or
off at any time
(see below).
You can do this from any
handset registered to the
base station.
Press the
SET button.
Press the
0 button twice.
Press the
OK ()
button.
KEYPAD
Enter the base station
PIN (original setting
0000
).
Press the
OK ()
button.
Press 1 to bar the
numbers you
have stored.
3 to enable
handsets to dial
only the
numbers stored.
0 to switch call
barring/call
enabling off.
Press the
OK ()
button to confirm.
Press the RED PHONE
button to return to
standby.
Please Note
The barred or enabled numbers
must be switched on before you can
use. See opposite.
01 1
Blank.
Memory
location (1-5).
Function
number entered
previously.
0
1
3
DEF
0
Diverse 3000 H_set & Charger 22/3/01 1:54 pm Page 25