Filter
Top Products
To set/clear the display of the
base station number on a handset
The default setting is to display the
number. This is useful if your
handset is connected to more than
one base station.
• Press the STO button.
• Press the 3 button then the 6
button. The current setting is
displayed.
• Press the 1 button to display the
base station number.
or
• Press the 0 button if you do not
want to display the base station
number.
• Press the STO button to confirm.
To set your handset for automatic
base selection
If you are moving around, and likely
to lose contact with your base
station, your handset can be made
to automatically switch to the first
available base station. If this is set
and you are in the area where the
signals of two base stations are
overlapping, your handset will select
the strongest signal.
The handset must be switched
ON
• Press the STO button.
• Press the INT button. Display
shows the numbers of the base
stations at which the handset is
registered.
• Press the 0 button to set
automatic selection.
• Press the STO button to confirm.
The handset will now select the
base station offering the strongest
signal. Display will show the base
station selected (unless
de-activated – see previous
paragraph to set/clear the display
of the base station number on a
handset).
STO
7
PQRS
6
MNO
STO
INT
0
Operating with additional base stations
56