Filter
Top Products
U sing your D i ver se 2 016
telephone
ON/OFF and PROTECTED
modes
The handset can be operated in one
of three different modes.
OFF
Phone calls cannot be made and the
handset does not respond to
incoming calls.
• To switch on, press and hold
down the
PWR button until the
display is activated.
ON
You can make and receive calls.
• To switch off, press and hold
down the
PWR button until the
display goes blank.
PROTECTED
This setting stops you accidentally
operating the handset’s keypad
when carrying it around. You can
still receive incoming calls but
cannot make outgoing calls.
• To switch to PROTECTED when
the handset is ON, press and
release the
PWR button quickly.
Press again to return to ON.
If the handset is out of range of the
base station, the symbol flashes.
You cannot make or receive calls until
the handset is brought back within
range. The symbol also flashes for a
while after power-up until the handset
automatically registers to the base.
Flashing can also mean that the
handset is not registered with the base.
To register a new handset, see page 52.
10