Filter
Top Products
or
• You may leave silence for
approximately 4 seconds after
recording your outgoing
message. The voice prompts you
for the concluding message and
you may then record your
concluding message.
• Press the END CALL button to
end the recording.
• Both your outgoing message and
the concluding message are
played back.
The unit will then automatically
revert into ‘Answer ON’ mode and
accept calls.
To play back your first outgoing
message (A1)
• Press the MODE button until the
voice says ‘Answer mode using
Announcement 1’.
• Press the MODE button. Voice
says ‘Mode’.
• Press the PLAY button. Your
message is played back. Along
with any concluding message.
• Stop playback at any time by
pressing the
STOP button.
To record your first outgoing
message (A1)
• Press the MODE button repeatedly
until the voice says ‘Answer mode
using Announcement 1’. Display
shows
A1.
• Press the MODE button once
again. Voice says ‘Mode’.
• Press the RECORD button within
3 seconds. Your handset rings.
• Press the PHONE button on your
handset (only if handset is not on
the base). The voice says
‘Recording announcement’.
• Now record your announcement
through the Handset.
• Press the END CALL button to
end the recording.
• Your recording is played back.
or if
• You are including a concluding
message press the
GREY button
on the base station immediately
after recording your outgoing
message.
Mode
Record
Mode
Play
Using your Diverse 2016 answering machine
25