Filter
Top Products
5. Remove the roller.
6. Clean the glass surface of the scanner with a soft, lint-free cloth.
DO NOT POUR OR SPRAY CLEANING FLUID DIRECTLY ONTO THE GLASS SURFACE.
7. Replace the roller by inserting one end into the locating hole on the left-hand side of the machine. Then with the
lever pointing forward press the right hand end down into the slot on the right.
8. Push the lever back into the upright position so that the roller cog wheel is engaged.
9. Close the cover and replace the handset. Reconnect the power and reset the date and time.
Help 57
B
T PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672