Filter
Top Products
6. Press to confirm the option displayed.
7. Press to return to standby.
Resending of documents in memory
If a document stored in memory fails to be sent (for example, the
number was engaged), your BT PaperJet 30 will automatically retry up to
3 times at 2 minute intervals. If after all retries the fax has not been sent,
the document will normally be deleted from memory. You have the
option of retaining failed faxes in memory to enable you to try sending
them again without re-scanning. To do this you must enable the
document re-transmission feature.
1. Press
repeatedly until the display shows
FAX SET-UP
then press .
2. Press to display
VARIOUS SETTINGS
.
3. Press
repeatedly until the display shows
RETRANS DOC:OFF
.
4. Press or to switch between
OFF
and
ON
.
5. Press to confirm the option displayed.
6. Press to return to standby.
Dial and fax tones on/off
Your BT PaperJet 30 lets you hear the dial tones as well as the fax
tones when connecting to another fax machine. You can turn the sound
On or Off.
1. Press
repeatedly until the display shows
INSTALLATION
then
press to scroll to
LINE MONITOR:OFF
.
2. Press or to switch between
OFF
and
ON
.
3. Press to confirm the option displayed.
4. Press to return to standby.
Additional settings 41
B
T PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672