Filter
Top Products
32
B
T PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
2. Press to display
SERV.CENTRE NO
.
3. Press or to display
TERMINAL NO
.
4. Press . The display shows
TERMINAL NO. (0-9) 9
.
5. Enter a one digit number - , different to the subaddress used by your
other phone (which probably use 9) so that your BT PaperJet 30 can
receive messages sent to it.
6. Press to confirm.
7. Press to return to standby.
8. When you change the subaddress of your BT PaperJet 30 you should
send a text to register the address with the BT text system.
Audible alert
Set your BT PaperJet 30 to give an audible alert whenever it receives at
text message. You can switch the audible alert on or off.
1. Press then or to scroll to
CONFIGURATION
.
2. Press to display
SERV.CENTRE NO
.
3. Press or to display
SMS RX ADVICE
.
4. Press to display
SMS RX ADVICE N
.
5. Press or to switch between options
N
= no,
Y
= yes.
6. Press to confirm the option displayed.
7. Press to return to standby.
Delete, edit, forward and print texts
You can view messages in the SENT, WRITTEN and RECEIVED folders
and then delete or edit and forward them.
1. Press then or to scroll to
SMS SENT XX
or
WRITTEN
or
RECEIVED
.
SMS
9 is the default subaddress used by the BT
text service. Any texts sent to you without
the subaddress specified will go to
subaddress 9.
Message folders
The Sent and W
ritten Message folders can
each hold up to 5 texts.
The Received Message folder can hold up to
30 texts.
When they are full, you must delete texts
before sending new ones.