Filter
Top Products
55
BT Freestyle 6300 – Edition 4.0 – 15.10.04 – 6488
Cannot dial out or receive calls
n The batteries may need recharging.
n Has there been a power cut? If so, place the handset
back on the base for 10 seconds and try again. If it still
does not work disconnect the batteries and mains power
for 10 minutes, then reconnect and try again.
You have a dial tone, but the phone will not dial out
n You may need to change the dial mode from tone to
pulse, see page 46.
n If you are connected to a switchboard, check whether
you need to dial an access code.
Handset does not ring
n The ringer volume may be switched off, see page 40.
n Make sure the handset is registered to the base, see
page 48.
icon is flashing
n Is the handset registered correctly to the base?
See page 49.
Check that the handset is within range of the base.
Help
6488 BT Freestyle 6300 UG [4] 18/10/04 11:02 am Page 55