Filter
Top Products
44
BT Freestyle 6300 – Edition 4.0 – 15.10.04 – 6488
3. Use or to choose
On
and select OK. The current
setting is displayed.
4. Enter a new alarm time. As new digits are entered they
will overwrite the existing time. Select OK. The display
shows
Alarm On
.
5. Press to exit.
If you have more than one handset, you can set a
different alarm time on each. The alarm will only go off
on the handset on which it was set. Press any button on
the handset to stop the alarm ringing.
Switch off an alarm that has been set
1. At the base: Press then scroll or to display
Set Time
and select using OK.
Or
At the handset: Press Menu, scroll or to
Set Time
and press OK.
2. Scroll to
Alarm
and select OK. Then use or
to
Off
and select OK. The displays shows
Alarm Off
.
3. Press to exit.
If you set the alarm at the base, the alarm will only go
off at the base. Press any button on the base to stop the
alarm ringing.
Additional settings
When the alarm sounds
The volume starts low and
increases in steps to maximum
after approximately 30 seconds.
Press any button to silence the
alarm. If no button is pressed,
the alarm will stop automatically
after a minute.
6488 BT Freestyle 6300 UG [4] 18/10/04 11:02 am Page 44