Filter
Top Products
BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
10
USING
To adjust the ringer tone
The ringer tone can be set to
High or Low.
Use the ringer tone switch on
the underside of your
Converse 425 to set the ringer
tone you want:
R1 for LOW or
R2 for HIGH.
To adjust your caller’s
speech volume
During a call, you can adjust the
volume of your caller’s voice.
Press the
Volume button.
The display shows
VOLUME
and
the current volume level.
Turn the Navigator Wheel
clockwise to increase the
volume or anti-clockwise to
decrease it.
Directory
You can store 75 names and numbers
in the directory. Please note that stored
numbers can be no longer than 21 digits.
You can use the
Navigator Wheel – or
the keypad – to enter names and
numbers. The Navigator Wheel also
lets you scroll quickly through stored
names and numbers.
Directory entries are automatically
stored in alphabetical order. Numbers
without attached names are stored at
the beginning of the list.
Note
The call indicator light will flash
regardless of the ringer setting chosen.
RINGER
R1
R2
Message Waiting indicator
When you have Voice Mail
messages, the Message Waiting
indicator flashes at regular
intervals.
To adjust the ringer volume
There are 3 volume settings to
choose from: HI, LOW or OFF.
Use the ringer volume switch
on the underside of your
Converse 425 to set the volume
you want:
HI, LOW or OFF.
Note
This feature works with compatible
switchboards only.
RINGER
VOLUME
HI
LOW
OFF
Note
The directory is pre-programmed with
some BT Calling Features numbers
(see ‘Using BT Calling Features’ on
page 15). These can be overwritten if
you wish.