Filter
Top Products
BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
9
Handsfree talking
The handsfree feature allows you to
make and receive calls without lifting
the handset.
To make a handsfree call
Press the Handsfree button.
You will hear the dial tone.
Dial the telephone number.
The number will be shown on
the display.
When your call is answered
you can either speak in
handsfree mode or pick up the
handset if you wish to speak to
your caller privately.
Note
To cancel repeat dial before your call
is answered, lift the handset or press
the Handsfree button or press the
Headset button.
USING
To repeat dial a number
If the number you call is
engaged, you can set your
Converse 425 to dial a number
repeatedly, saving you from
continually having to press the
Redial button.
When you hear the engaged
tone, press the
Redial button
and replace the handset (or
press the Handsfree button).
The display shows
BUSY
.
10 seconds after the handset
is replaced, your Converse 425
automatically picks up the line,
switches on the loudspeaker
and redials the number.
If it is still engaged, you need
do nothing, your phone will wait
for 45 seconds before repeating
the procedure.
This will be repeated every
45 seconds up to a maximum
of 15 times or until the call is
answered.
When your call is answered,
you can speak to your caller by
pressing
Handsfree or lift the
handset or press the
Headset
button and speak.
Note
This feature works in handset,
handsfree and headset modes.
To receive a call in
handsfree mode
When the phone rings, press
the Handsfree button and speak
to answer the call.