Filter
Top Products
5
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
WARNING
Do not place your BT Graphite 2100
in the bathroom or other humid
areas.
Handset range
The BT Graphite 2100 has a range of
300 metres outdoors when there is a
clear line of sight between the base
and the handset. Any obstruction
between the base and handset will
reduce the range signicantly.
With the base indoors and handset
either indoors or outdoors, the range
will normally be up to 50 metres.
Thick stone walls can severely affect
the range.
Signal strength
The
icon on your handset display
indicates when you are in range of
the base. When it ashes and you
hear a warning beep, you are out of
range and will need to move closer to
the base.
IMPORTANT
Do not connect the telephone line to
the telephone line wall socket until
the handset is fully charged.
The base station should be
plugged into the mains power
socket at all times.
Getting started
Location
You need to place your BT Graphite 2100 base within 3 metres of
a mains power socket and 2 metres of the telephone wall socket
so that the cables will reach.
Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.
Your BT Graphite 2100 works by sending radio signals between
the handset and base. The strength of the signal depends on
where you position the base. Putting it as high as possible can
help to provide the best signal.
Setting up
1. Plug the mains power adaptor (item code 052299) into the
power socket marked
on the back of the base and secure
the cable behind the retaining clip. Plug the other end into the
mains power wall socket and switch on. The base will come on
and beep.
Telephone line cord
(pre-installed).
Mains power adaptor.
Cable
retaining
clip