Filter
Top Products
32
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
icon ashes
• Is the handset registered correctly to the base, see page 29.
• Check that the mains power is correctly connected.
• Check that the handset is within range of the base.
• The batteries are low, place the handset on the base/charger to recharge.
You hear the busy tone when you press .
• Make sure the handset is in range of the base.
• Another handset registered to your BT Graphite 2100 base may be on the line.
No Caller Display number/name displayed
• Have you subscribed to a Caller Display service from your network provider, see page 23.
• The caller may have withheld their number.
• An exact name/number match was not found in your directory. Check that you have stored the
full STD dialling code.
Cannot register a handset to a base
• You can register a total of up to 5 handsets to your BT Graphite 2100 base. Check that you have
not exceeded the limit.
• Check that you have entered the correct PIN number (default PIN 0000).
• Check that you are at least one metre away from other electrical equipment to avoid interference
when registering.
Base unit does not ring, but the lights are on
• Have you connected the telephone line correctly?
• Is the base ringer set to off?
• You may have a faulty line or socket. Try using another socket or line. Call BT on 151 if you still
experience problems.