Filter
Top Products
3
Charging the V12 headset
The battery status is indicated below the battery icon. When the
percentage is below 20%, the battery of the headset is low. Charge
the unit.
1. Connect the charger’s plug into the Charger Input(1) of the V12.
Connect the charger to an external power source. The LCD(4) displays
CHARGING and the % battery level.
2. When the battery status reaches 100%,
the battery is full.
3. Unplug the charger.
Wearing the V12 on your ear
The Ear Hook(2) is reversible. Gently pull it out from its holder, reverse the position and
then secure it back into its holder. Wear it on either ear.
Wearing the V12 around your neck
The V12 can be worn around your neck attached to the included Lanyard for easy viewing
of the LCD screen. Place the Lanyard around your neck and plug the micro-usb adapter
end into the Charge port of the V12. Though you will not hear a ring tone from the V12 at
that distance from your ear, you will feel the Vibrating Alert and hear your phone ring…
(Note: not all phones will give a ring tone when a Bluetooth device is connected)
On an incoming call, check the Caller ID and if you want to answer pull the V12 off the
Lanyard and slip on to your ear.