Filter
Top Products
11
10. Can I use voice activated dialing if my phone supports it?
Yes the V12 supports voice activated dialing if your phone also supports it. This
feature requires the phone to support the Handsfree profi le which (generally) all
newly released phones do support. Headset profi le is becoming outdated and few
phones are released only with Headset profi le these days.
Check your phones user manual for information on setting this up.
11. Can I use the V12 to listen to music from my mobile?
Some phones can send music to the V12 using the Handsfree Profi le but it will be a
mono signal and sound a bit like an AM radio. Good applications for this are audio
books.
12. How often should I charge my V12?
You should charge the V12 when the LCD Battery Indicator shows 20% or below.
The battery will last for about 300 hrs on standby and much longer if the V12 is
switched off in between uses.
13. Can I use my V12 with my computer for VOIP applications?
Yes, you can connect the V12 to a PC or Mac that supports the Bluetooth Headset
or Handsfree profi le. To do this you need to have Bluetooth enabled in your computer
by using a Bluetooth USB Dongle or having a computer that has Bluetooth inbuilt.
Depending on the Bluetooth software installed, the connection process is different.
Simply put the V12 into Pairing mode, then activate a search using your computers
Bluetooth Software. When the V12 is displayed, enter the Passkey “0000” then start
the Headset/Handsfree service by connecting the headset.
Note: Microsoft’s® Windows® XP generic Bluetooth driver does not support audio, but
your computer may be using a different driver that does support it.
To check which Bluetooth driver you have, go to:
Control Panel > Sounds, Speech and Audio Devices > Sounds and Audio Devices.
Click on the hardware tab and fi nd the “Bluetooth Audio” in the Devices. Left click on
the “Bluetooth Audio” to make it highlighted. Below you can see which manufacturer’s
device driver is linked to the “Bluetooth Audio”.
Check your computer manufacturers’ website for any software updates.
Go to our website for more details on using the V12 for VOIP.
14. Do I need to pair the devices every time I use them together?
No, the pairing process is required only once for each phone, unless the devices
are deleted.