Filter
Top Products
32
Your BT Quartet 2010 can be wall-mounted using
the screws and wall plugs provided. Use the
wall-mounting template opposite as a guide for
the drill holes.
Before you wall-mount your Quartet 2010 or
handset charger (or both), check that:
• The wall can support the weight of the
apparatus.
• The position you choose leaves enough space
for the unit to clear any obstruction on the wall
with the aerial extended, such as a shelf.
• The positioning gives you sufficient radio
coverage. Avoid mounting the units near large
metal objects and minimising the amount of
walls between the base unit and the handsets.
1 Using a pencil, mark the place on the wall
where you wish to place the screws using the
wall-mounting template on page 39.
2 Drill two holes suitable for the screws and
wall plugs supplied (if required).
3 Drive the screws into the wall, leaving about
5 mm free on which to hang the Quartet 2010.
4 Position the power and telephone cords down
through the grooves before you hook the unit
on the screws.
Wall mounting
To wall-mount the Quartet 2010
base unit