Filter
Top Products
19
ENGLISH
number of one of five available volume levels) and you will hear a fragment of the
current ringer melody at selected volume.
5. Using the [5] or [6] buttons, choose an appropriate volume level you like or
disable the ringer.
6. Press the OK button [7] to confirm your selection.
7. Press and hold the CANCEL button [9] to exit this menu item.
Adjusting the handset speaker volume
1. Press the OK button [7], the LCD [2] will show: “PHONE BOOK”.
2. Press the [6] button, the LCD [2] will show: “HANDSET”.
3. Press the OK button [7].
4. Press the [6] button repeatedly until the LCD [2] shows: “EAR VOL”.
5. Press the OK button [7], the LCD [2] will show: “EAR VOL X” (X = number of one of
5 available volume levels).
6. Using the [5] or [6] buttons, choose an appropriate volume level.
7. Press the OK button [7] to confirm your selection.
8. Press and hold the CANCEL button [9] to exit this menu item.
Changing the handset name
1. Press the OK button [7], the LCD [2] will show: “PHONE BOOK”.
2. Press the [6] button, the LCD [2] will show: “HANDSET”.
3. Press the OK button [7].
4. Press the [6] button repeatedly until the LCD [2] shows: “HS NAME”.
5. Press the OK button [7].
6. Enter the new handset name (up to 5 characters), using the dialing buttons [11].
7. Press the OK button [7] to confirm the new name.
8. Press and hold the CANCEL button [9] to exit this menu item.
Changing the LCD language
1. Press the OK button [7], the LCD [2] will show: “PHONE BOOK”.
2. Press the [6] button, the LCD [2] will show: “HANDSET”.
3. Press the OK button [7].
4. Press the [6] button repeatedly until the LCD [2] shows: “LANGUAGE”.
5. Press the OK button [7], the LCD [2] will show: “ENGLISH”.
6. Using the [5] or [6] buttons, choose the language you need.
7. Press the OK button [7] to confirm your selection and go to the previous menu item.
8. Press and hold the CANCEL button [9] to exit this menu item.
Changing the disconnect timeout (the FLASH feature)
1. Press the OK button [7], the LCD [2] will show: “PHONE BOOK”.
2. Press the [6] button repeatedly until the LCD [2] shows: “BASE”, then press the
OK button [7].